The cutting and rewinding non-woven fabric pattern machine
Equipment for producing spunlace cloth, non-woven, wood pulp cloth
non-woven embossed products, equipped with PLC programming and
servo motor control, line pitch infinite. Can be customized
embossing system according to customer requirements, production of
core or coreless, hit or not hit the line products, one machine
multi-purpose, welcomed the field visits.
Automatic non-woven points cutting machine can complete embossing,
phone line, counting, cutting, coiling process end neat flatness,
line is clear. Is the production of spunlace cloth, cloth, cloth
and other pulp acupuncture non-woven embossed slitting rewinding
circular knife cut type
Special pneumatic compression device, technology and domestic lead
Cutting raw material
Spunlace cloth, wood pulp, acupuncture cloth, with material, field
60-90 M / min
Color touch screen
PLC servo drive
of about 3500kg specific weight depending on the machine
specific contact Sales Manager
1. Collect roll length and all knurling electroplating and, large
embossing device of an a, embossing roll a root by treatment of
electroplating, another piece of the wool and production. Patterns
of products can be customized according to customer requirements.
2 pneumatic automatic feeding device, pneumatic with wide belt
conveyor, with automatic counting down function (infrared)
3 equipment cutting knife using the upper and lower, left and right
to lift the knife device, improve the service life of the cutter,
the rolling roller with a continuously variable speed device, can
adjust the speed of winding.
4 the original cloth is placed in a wide belt, gas - up - axis, and
the use of gear - type stepless speed regulator to adjust the
tension device. Pneumatic synchronous delivery.
5 the air pressure of the winding roller.
6 using PLC programming and servo electrical control, make the hole
pitch unlimited adjustable.
7 equipment with high precision aluminum alloy roller and the
wrinkle, the tail moving correction system.
8. Stepless speed regulation, control embossing, line, slitting and
rewinding speed, counting, online cutting on the knife 10 sets, can
freely adjust the cutting size.
9 the equipment adopts imported frequency conversion control speed
regulation, the electrical part of the machine is reasonable, safe,
clean, easy to operate.
10 machine equipped with a control device, can produce a core no
core complex products, can play the line or not to play the line,
the configuration can be adjusted to the elastic device, speed
11. The whole frame use the formed steel, surface and antirust
processing, all machine bedplate must do antirust paint processing,
frame welding is accurate in size, stent of appropriate
reinforcement, pulley, gear and all transmission part center
accuracy, ensure the smooth operation of the machine, machine
within two years will not be off the plastic phenomenon.
12. Standard fasteners of main parts of the hexagonal screw and
high-quality domestic 45# steel, the product easy to cause the
health impact of the parts are made of stainless steel materials,
machine electricity part within two years will not rust,
13 the transmission gear and the important part of the transmission
shaft of the material are the use of special technology hard heat
At present the same industry, the same equipment in the production
of quality or technical indicators are not comparable with our